These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Pilot Valve Type
N/A
Solenoid
Double
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Spool Code
6
Indicator Lights
Yes
Response Type
Standard Response
Actuator Type
Solenoid
Overrides
No Overrides
Seal Material
Buna-N
Housing Code
W
Pilot/Drain
None
Coil Type Code
F
Port T Code
7
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
AC/DC
DC
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Operation
Solenoid Operated
Electrical Options
None
Electrical Connector Code
T
Manual Override Option Code
None
Port Restrictor Plug Code
None
Function Code
6
Coil Rating Code
HL
Design No.
60
Spool Spring Arrangement Code
C
Mechanical Options
None
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
L
Crossover
P Blocked, A or B to T
Electrical Connection
Wired Terminal Block
EN Code
None
Port T Pressure Rating
3000 psi
Solenoid Code
HL
Reducer Module
N/A
Solenoid Energization Code
None
NFPA Size
D03
Voltage & Frequency
24 VDC, Low Power Coil
Cycle Rate [Max]
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back