These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
Wired Terminal Block
NFPA Size
D03
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
Center Position
P Blocked, A & B to T
Function
3-Position Spring Centered
Solenoid Indicator Lights Code
L
Indicator Lights
Yes
Housing Code
W
Seal Material
Buna-N
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Electrical Connector Code
T
Solenoid
Double
Pressure [Max]
5075 psi
Overrides
No Overrides
Coil Rating Code
HL
Port T Code
7
Voltage & Frequency
24 VDC, Low Power Coil
AC/DC
DC
Port Restrictor Plug Code
None
Spool Code
6
Solenoid Energization Code
None
Cycle Rate [Max]
N/A
Manual Override Option Code
None
Pilot Valve Type
N/A
Coil Type Code
F
Electrical Options
None
Port Restrictor Plugs
None
Function Code
6
Spool Shift Timing
N/A
Valve Type
High-Performance
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Crossover
P Blocked, A or B to T
Response Type
Standard Response
Operation
Solenoid Operated
Design No.
60
EN Code
None
Mechanical Options
None
Port T Pressure Rating
3000 psi
Pilot/Drain
None
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper Code
None
Solenoid Code
HL
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back