These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
W
AC/DC
AC
Voltage & Frequency
110/120 VAC – 50/60 Hz
Overrides
No Overrides
Spool Shift Timing
N/A
EN Code
None
Mechanical Options
None
NFPA Size
D03
Solenoid Code
B
Pilot Valve Type
N/A
Function
2-Position Spring Offset, End to End
Surge Suppressor/Damper
None
Spool Indicator Switch Code
S5
Solenoid Indicator Lights Code
L
Electrical Connector Code
T
Port Restrictor Plug Code
None
Coil Type Code
F
Coil Rating Code
B
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Design No.
60
Function Code
2
Manual Override Option Code
None
Crossover
All Ports Blocked
Electrical Connection
Wired Terminal Block
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Center Position
All Ports Blocked
Port T Code
2
Spool Code
2
Electrical Options
None
Actuator Type
Solenoid
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Solenoid
Single
Pilot/Drain
None
Indicator Lights
Yes
Valve Type
High-Performance
Seal Material
Buna-N
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port Restrictor Plugs
None
Port T Pressure Rating
150 psi
Reducer Module
N/A
Spool Spring Arrangement Code
AL
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back