These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
T
Port Restrictor Plug Code
None
Spool Code
2
Housing Code
W
Solenoid Code
B
Surge Suppressor/Damper Code
None
Spool Spring Arrangement Code
AL
Overrides
No Overrides
Pilot/Drain
None
Operation
Solenoid Operated
Pilot Valve Type
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Cycle Rate [Max]
N/A
Electrical Options
None
Crossover
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Spool Indicator Switch Code
S5
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
Actuator Type
Solenoid
Design No.
60
Solenoid
Single
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Connection
Wired Terminal Block
Center Position
All Ports Blocked
Solenoid Indicator Lights Code
L
Pressure [Max]
5075 psi
AC/DC
AC
Seal Material
Buna-N
Port Restrictor Plugs
None
EN Code
None
NFPA Size
D03
Mechanical Options
None
Reducer Module
N/A
Function Code
2
Valve Type
High-Performance
Coil Type Code
F
Indicator Lights
Yes
Function
2-Position Spring Offset, End to End
Port T Code
2
Port T Pressure Rating
150 psi
Coil Rating Code
B
Response Type
Standard Response
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back