These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Options
None
EN Code
None
Valve Type
High-Performance
Indicator Lights
No
NFPA Size
D03
Center Position
P to T, A & B Blocked
Surge Suppressor/Damper
None
Mechanical Options
None
Coil Rating Code
G
Port Restrictor Plug Code
None
Housing Code
None
Electrical Connection
No Connector
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
Crossover
All Ports Open, Restricted
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
AC/DC
DC
Solenoid Code
G
Coil Type Code
SP2
Voltage & Frequency
12 VDC
Pilot/Drain
None
Solenoid Energization Code
V
Rated Flow [Max]
21 gal/min
Coil Type
Dual 6.3 mm Spade
Solenoid
Double
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Reducer Module
N/A
Spool Indicator Switch Code
None
Pilot Valve Type
N/A
Actuator Type
Solenoid
Operation
Solenoid Operated
Response Type
Standard Response
Design No.
61
Spool Code
8
Function Code
8
Seal Material
Buna-N
Spool Shift Timing
N/A
Function
3-Position Spring Centered
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
C
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
