These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
None
Coil Rating Code
G
Mechanical Options
None
Spool Indicator Switch Code
None
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
NFPA Size
D03
Function
3-Position Spring Centered
Port T Code
7
Port Restrictor Plug Code
None
Response Type
Standard Response
Spool Shift Timing
N/A
Operation
Solenoid Operated
Electrical Connection
No Connector
Pilot/Drain
None
AC/DC
DC
Overrides
No Overrides
Spool Spring Arrangement Code
C
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Coil Type Code
SP2
Coil Type
Dual 6.3 mm Spade
Surge Suppressor/Damper
None
EN Code
None
Crossover
All Ports Open, Restricted
Spool Code
8
Function Code
8
Solenoid Code
G
Pilot Valve Type
N/A
Voltage & Frequency
12 VDC
Port Restrictor Plugs
None
Design No.
61
Manual Override Option Code
None
Center Position
P to T, A & B Blocked
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Indicator Lights
No
Solenoid Energization Code
V
Solenoid
Double
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Housing Code
None
Electrical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back