Find a Service Center
- D05 Double Solenoid Operated Valve
- 48 VDC
- Lead Wires w/o Terminal Box
- Flying Leads
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Coil Type | Flying Leads |
| Port T Pressure Rating | 1000 psi |
| NFPA Size | D05 |
| Center Position | P Blocked, A & B to T |
| Indicator Lights | No |
| Electrical Options Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Design No. | 60 |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Actuator Type | Solenoid |
| Rated Flow [Max] | 25 gal/min |
| Seal Material | Buna-N |
| Port Restrictor Plugs | None |
| Coil Type Code | None |
| Operation | Solenoid Operated |
| Coil Rating Code | J |
| Electrical Options | None |
| Valve Type | Standard-Duty |
| Pressure [Max] | 3600 psi |
| Solenoid | Double |
| Pilot Valve Type | N/A |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| Mechanical Options | None |
| Surge Suppressor/Damper | None |
| Spool Code | 6 |
| AC/DC | DC |
| Voltage & Frequency | 48 VDC |
| Flow Direction Code | 4 |
| Function | 3-Position Spring Centered |
| Crossover | P Blocked, A or B to T |
| Spool Spring Arrangement Code | C |
| Weight | 10.0 LB |
