Find a Service Center
- D05 Double Solenoid Operated Valve
- 48 VDC
- Lead Wires w/o Terminal Box
- Flying Leads
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Coil Type Code | None |
| Center Position | P Blocked, A & B to T |
| Design No. | 60 |
| Spool Code | 6 |
| Reducer Module | N/A |
| Rated Flow [Max] | 25 gal/min |
| Seal Material | Buna-N |
| Flow Direction Code | 4 |
| AC/DC | DC |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Crossover | P Blocked, A or B to T |
| NFPA Size | D05 |
| Indicator Lights | No |
| Pilot/Drain | None |
| Function | 3-Position Spring Centered |
| Surge Suppressor/Damper | None |
| Pilot Valve Type | N/A |
| Overrides | No Overrides |
| Mechanical Options Code | None |
| Coil Rating Code | J |
| Solenoid | Double |
| Actuator Type | Solenoid |
| Cycle Rate [Max] | N/A |
| Response Type | Standard Response |
| Operation | Solenoid Operated |
| Coil Type | Flying Leads |
| Port T Pressure Rating | 1000 psi |
| Spool Spring Arrangement Code | C |
| Pressure Port Check Valve Pressure | N/A |
| Pressure [Max] | 3600 psi |
| Valve Type | Standard-Duty |
| Port Restrictor Plugs | None |
| Mechanical Options | None |
| Voltage & Frequency | 48 VDC |
| Electrical Options Code | None |
| Electrical Options | None |
| Weight | 10.0 LB |
