These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Port T Pressure Rating
3000 psi
NFPA Size
D03
EN Code
None
Overrides
No Overrides
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Coil Rating Code
B
Manual Override Option Code
None
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Center Position
All Ports Open
Crossover
All Ports Open
Design No.
60
Port Restrictor Plug Code
None
Function
2-Position Spring Offset, End to Center
Actuator Type
Solenoid
Spool Code
0
Solenoid Code
B
Solenoid Energization Code
None
Operation
Solenoid Operated
Function Code
0
Pilot/Drain
None
Surge Suppressor/Damper
None
Mechanical Options
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Spring Arrangement Code
BL
Response Type
Standard Response
Solenoid Indicator Lights Code
L
Housing Code
W
AC/DC
AC
Coil Type Code
F
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Indicator Lights
Yes
Electrical Options
None
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Solenoid
Single
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Port T Code
6
Electrical Connection
Five Pin Connector
Electrical Connector Code
PA5
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back