These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Port Restrictor Plugs
None
Coil Rating Code
B
Valve Type
High-Performance
Spool Shift Timing
N/A
AC/DC
AC
Electrical Options
None
Overrides
No Overrides
EN Code
None
Spool Code
0
Solenoid Indicator Lights Code
L
Actuator Type
Solenoid
Function Code
0
Manual Override Option Code
None
Pilot/Drain
None
Spool Indicator Switch Code
None
Solenoid Energization Code
None
Solenoid
Single
Function
2-Position Spring Offset, End to Center
Electrical Connector Code
PA5
Center Position
All Ports Open
Electrical Connection
Five Pin Connector
NFPA Size
D03
Design No.
60
Port T Code
6
Spool Spring Arrangement Code
BL
Indicator Lights
Yes
Operation
Solenoid Operated
Reducer Module
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Seal Material
Buna-N
Crossover
All Ports Open
Mechanical Options
None
Housing Code
W
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Response Type
Standard Response
Solenoid Code
B
Coil Type Code
F
Cycle Rate [Max]
N/A
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back