
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End To Center Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Operation | Solenoid Operated |
Cycle Rate [Max] | N/A |
Coil Type | Flying Leads |
Compatible Fluids | Petroleum Oil |
Pilot Valve Type | N/A |
Flow Direction Code | 4 |
Electrical Connection | Lead Wires w/o Terminal Box |
Actuation Identification | Solenoid B |
Electrical Options | None |
AC/DC | AC |
Manual Override | Plain Override |
Tank Port Rating | 1000 |
Pressure Port Check Valve Pressure | N/A |
Fluid Cleanliness | 19/17/14 micron |
Electrical Options Code | L |
Valve Type | Standard-Duty |
Seal Material | Buna-N |
Model No. | DG4S4L-012B-B-60 |
Port T Pressure Rating | 1000 psi |
Temperature Range [Min] | 68 °F |
Solenoid | Single |
Pilot/Drain | None |
Performance | Standard Performance |
Center Position | All Ports Blocked |
Response Type | Standard Response |
Mounting | Subplate/Manifold Mount |
NFPA Size | D05 |
Coil Rating Code | B |
Voltage & Frequency | 110/120 VAC - 50/60 Hz |
Indicator Lights | Yes |
Surge Suppressor/Damper | None |
Mechanical Options Code | None |
Temperature Range [Max] | 122 °F |
Pressure [Max] | 4500 psi |
Coil Type Code | None |
Reducer Module | N/A |
Body Material | Gray Iron |
Leakage | Standard Performance |
Overrides | No Overrides |
Mechanical Options | None |
Spool Spring Arrangement Code | B |
Function | 2-Position Spring Centered, End To Center |
Crossover | All Ports Blocked |
Actuator Type | Solenoid |
No. of Stages | Single Stage |
Port Restrictor Plugs | None |
Design No. | 60 |
Rated Flow [Max] | 24 gal/min |
Spool Code | 2 |
Response Time | 20 to 40 ms |
Weight | 10.0 LB |
