These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Code
2
Pressure [Max]
5075 psi
Coil Rating Code
H
Solenoid
Single
Function
2-Position Spring Offset, End to End
Voltage & Frequency
24 VDC
Housing Code
W
Port Restrictor Plugs
None
Operation
Solenoid Operated
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
NFPA Size
D03
Spool Spring Arrangement Code
A
Solenoid Code
H
Crossover
All Ports Blocked
Spool Code
2
Electrical Connector Code
T
Indicator Lights
Yes
Function Code
2
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Response Type
Standard Response
Electrical Connection
Wired Terminal Block
Port T Pressure Rating
150 psi
Spool Indicator Switch Code
S5
Overrides
No Overrides
Electrical Options
None
AC/DC
DC
Pilot Valve Type
N/A
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
L
EN Code
None
Spool Shift Timing
N/A
Solenoid Energization Code
None
Mechanical Options
None
Reducer Module
N/A
Coil Type Code
F
Pilot/Drain
None
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Center Position
All Ports Blocked
Design No.
60
Manual Override Option Code
None
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
