These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
Voltage & Frequency
24 VDC
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
150 psi
Housing Code
W
Response Type
Standard Response
Function Code
2
Manual Override Option Code
None
Spool Shift Timing
N/A
EN Code
None
Spool Indicator Switch Code
S5
Coil Type Code
F
Indicator Lights
Yes
Crossover
All Ports Blocked
Electrical Connector Code
T
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Seal Material
Buna-N
Electrical Options
None
Surge Suppressor/Damper
None
Design No.
60
Function
2-Position Spring Offset, End to End
Electrical Connection
Wired Terminal Block
Solenoid Indicator Lights Code
L
Spool Spring Arrangement Code
A
AC/DC
DC
Spool Code
2
Port Restrictor Plug Code
None
Center Position
All Ports Blocked
Port T Code
2
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Solenoid Code
H
Pilot Valve Type
N/A
NFPA Size
D03
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Port Restrictor Plugs
None
Reducer Module
N/A
Solenoid Energization Code
None
Coil Rating Code
H
Solenoid
Single
Actuator Type
Solenoid
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
