These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Voltage & Frequency
24 VDC
Solenoid Energization Code
V
Coil Rating Code
H
Surge Suppressor/Damper
None
Solenoid
Single
Electrical Options
None
Port T Pressure Rating
3000 psi
Function Code
0
Housing Code
None
Mechanical Options
None
Actuator Type
Solenoid
Operation
Solenoid Operated
Manual Override Option Code
None
Spool Spring Arrangement Code
BL
NFPA Size
D03
Coil Type
DIN 43650
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Electrical Connection
DIN 43650
Center Position
All Ports Open
Pilot/Drain
None
Spool Indicator Switch Code
None
Design No.
60
Valve Type
High-Performance
Solenoid Code
H
EN Code
None
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to Center
Indicator Lights
No
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Spool Code
0
Port T Code
7
Coil Type Code
U
Seal Material
Buna-N
Response Type
Standard Response
Overrides
No Overrides
Reducer Module
N/A
Port Restrictor Plugs
None
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Electrical Connector Code
None
Crossover
All Ports Open
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back