These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
None
Reducer Module
N/A
EN Code
None
Port T Code
7
Electrical Connection
DIN 43650
Function
2-Position Spring Offset, End to Center
Rated Flow [Max]
21 gal/min
Coil Type
DIN 43650
Coil Rating Code
H
Electrical Connector Code
None
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Response Type
Standard Response
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Spool Code
0
Function Code
0
Electrical Options
None
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Solenoid Code
H
Pilot/Drain
None
Seal Material
Buna-N
Spool Shift Timing
N/A
NFPA Size
D03
Solenoid Energization Code
V
Voltage & Frequency
24 VDC
Pressure [Max]
5075 psi
AC/DC
DC
Crossover
All Ports Open
Spool Spring Arrangement Code
BL
Center Position
All Ports Open
Pressure Port Check Valve Pressure
N/A
Coil Type Code
U
Indicator Lights
No
Valve Type
High-Performance
Manual Override Option Code
None
Solenoid
Single
Port Restrictor Plug Code
None
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
Mechanical Options
None
Design No.
60
Surge Suppressor/Damper
None
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
