Find a Service Center
Alternate Products
- 70 mm ID x 150 mm OD x 35 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Capacity | High Capacity |
| Bearing Type | Angular Contact |
| Outer Ring Width | 35 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Oil | 5000 rpm |
| Inch/Metric | Metric Bore |
| Seal Material | None |
| Snap Ring | No Snap Ring |
| Locking Device | No Locking Device |
| I.D. | 70 mm |
| Material | Steel |
| Preload Level | None |
| No. in Set | Single Bearing |
| Enclosure | Open |
| Precision | Standard |
| O.D. Type | Straight |
| Limiting Speed - Grease | 3800 rpm |
| Seal Type | Unsealed |
| Contact Angle | 40° |
| Radial Internal Clearance | Normal |
| Cage Material | Polyamide (Molded Nylon) |
| Rows of Balls | Single |
| icNumber | 7695844 |
| Lubricant | Oil Preservative |
| Bearing Design | w/ Smaller Axial Internal Clearance |
| O.D. | 150 mm |
| Bore Type | Round Bore |
| Cage Type | Plastic |
| Weight | 5.732 LB |
| EAN or UPC | 7316577610225 |
