Find a Service Center
Alternate Products
- 70 mm ID x 150 mm OD x 35 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Capacity | High Capacity |
| Preload Level | None |
| No. in Set | Single Bearing |
| Lubricant | Oil Preservative |
| icNumber | 7695844 |
| Limiting Speed - Grease | 3800 rpm |
| Outer Ring Width | 35 mm |
| Bearing Type | Angular Contact |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| Radial Internal Clearance Specification | Normal Clearance |
| Precision | Standard |
| Inch/Metric | Metric Bore |
| O.D. | 150 mm |
| Seal Type | Unsealed |
| Radial Internal Clearance | Normal |
| Locking Device | No Locking Device |
| Bearing Design | w/ Smaller Axial Internal Clearance |
| Enclosure | Open |
| Ball Material | Steel |
| I.D. | 70 mm |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Cage Material | Polyamide (Molded Nylon) |
| Snap Ring | No Snap Ring |
| Limiting Speed - Oil | 5000 rpm |
| Rows of Balls | Single |
| Cage Type | Plastic |
| Seal Material | None |
| Contact Angle | 40° |
| Weight | 5.732 LB |
| EAN or UPC | 7316577610225 |
