Find a Service Center
Alternate Products
- 60 mm ID x 130 mm OD x 31 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Cage Type | Plastic |
| Locking Device | No Locking Device |
| Preload Level | Small Axial Clearance |
| Rows of Balls | Single |
| Inner Ring Width | 1.22 in, 31 mm |
| No. in Set | Single Bearing |
| Width | 1.22 in, 31 mm |
| Radial Internal Clearance | Normal |
| Bore Type | Cylindrical |
| Cage Material | Polyamide |
| Precision Level | Standard (ABEC 1) |
| Ball Material | Steel |
| I.D. | 2.36 in, 60 mm |
| O.D. | 5.12 in, 130 mm |
| Contact Angle | 40 Degree |
| Limiting Speed - Grease | 4500 rpm |
| Bearing Type | Unmounted, Angular Contact |
| Outer Ring Width | 1.22 in, 31 mm |
| Capacity | High Capacity |
| Limiting Speed - Oil | 6000 rpm |
| Inch/Metric | Metric |
| Bearing Design | w/ Smaller Axial Internal Clearance |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Cylindrical |
| icNumber | 7695835 |
| Enclosure | Open |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Material | Bearing Steel |
| Seal Material | None |
| Snap Ring | No Snap Ring |
| Seal Type | Unsealed |
| Flush Ground | No |
| Series | 7300 |
| Weight | 3.827 LB |
| EAN or UPC | 7316577610638 |
