Find a Service Center
Alternate Products
- 60 mm ID x 130 mm OD x 31 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Precision | Standard |
| Bearing Design | w/ Smaller Axial Internal Clearance |
| Series | 7300 |
| Ball Material | Steel |
| O.D. Type | Cylindrical |
| Bearing Type | Unmounted, Angular Contact |
| Bore Type | Cylindrical |
| Preload Level | Small Axial Clearance |
| Flush Ground | No |
| Limiting Speed - Grease | 4500 rpm |
| Enclosure | Open |
| Locking Device | No Locking Device |
| Cage Material | Polyamide |
| icNumber | 7695835 |
| Rows of Balls | Single |
| Inch/Metric | Metric |
| Material | Bearing Steel |
| Capacity | High Capacity |
| Snap Ring | No Snap Ring |
| I.D. | 2.36 in, 60 mm |
| Contact Angle | 40 Degree |
| Lubricant | Oil Preservative |
| No. in Set | Single Bearing |
| Radial Internal Clearance | Normal |
| Width | 1.22 in, 31 mm |
| Precision Level | Standard (ABEC 1) |
| Seal Material | None |
| Cage Type | Plastic |
| Seal Type | Unsealed |
| Outer Ring Width | 1.22 in, 31 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Inner Ring Width | 1.22 in, 31 mm |
| O.D. | 5.12 in, 130 mm |
| Limiting Speed - Oil | 6000 rpm |
| Weight | 3.827 LB |
| EAN or UPC | 7316577610638 |
