Find a Service Center
- Radial Shaft Seal
- 1117.6 mm Shaft Diameter
- 1168.806 mm Housing Bore Diameter
- 19.446 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Metric |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 1117.6 mm |
| Temperature Range [Max] | 250 °F |
| Seal Application | General Purpose |
| Construction | HDS2 |
| Surface Speed [Nom] | 5,000 ft/min |
| Housing Bore Dia. | 1168.806 mm |
| Pressure | 15 psi |
| Seal Design | Molded Design |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Lip Type | Single Lip w/Spring |
| Lip Material | Nitrile |
| Weight | 15.157 LB |
| EAN or UPC | 85311150019 |
