Find a Service Center
- Radial Shaft Seal
- 1117.6 mm Shaft Diameter
- 1168.806 mm Housing Bore Diameter
- 19.446 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip w/Spring |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 5,000 ft/min |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Inch/Metric | Metric |
| Housing Bore Dia. | 1168.806 mm |
| Construction | HDS2 |
| Shaft Dia. | 1117.6 mm |
| Seal Design | Molded Design |
| Temperature Range [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Pressure | 15 psi |
| Seal Application | General Purpose |
| Weight | 15.157 LB |
| EAN or UPC | 85311150019 |
