Find a Service Center
- Single Row Radial Bearing, 8 mm ID x 22 mm OD x 0.406" Wide, Double Sealed (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The 30 metric series is available with one felt seal (suffix T), with one felt seal and one shield (suffix TD), and with two felt seals (suffix TT). The felt seal provides an effective barrier against the entrance of foreign matter and the escape of lubricant. It is a contact seal with the felt riding on the ground surface of the inner ring O.D. Because the felt washer absorbs some lubricant, these bearings can be operated at moderate speeds without excessive heating. These bearings are electric-motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bore Type | Round Bore |
| Radial Internal Clearance | Normal |
| Precision | Standard |
| Cage Type | Metal |
| Static Load Rating [Max] | 305 lbf |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Fillet Radius | 0.012 in |
| Capacity | Standard Capacity |
| Enclosure | Double Sealed |
| Dynamic Load Rating | 830 lbf |
| Inner Ring Width | 0.406 in |
| O.D. Type | Straight |
| Limiting Speed - Grease | 14010 rpm |
| icNumber | 7700524 |
| I.D. | 8 mm |
| Temperature Range [Min] | -30 °F |
| No. in Set | Single Bearing |
| Width | 261.925 mm |
| Seal Material | Felt |
| Inch/Metric | Metric Bore |
| O.D. | 22 mm |
| Preload Level | None |
| Material | Steel |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| Bearing Type | Radial |
| Limiting Speed - Oil | 16350 rpm |
| Cage Material | Steel |
| Ball Material | Steel |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Polyurea Base |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Light Contact Seals |
| Temperature Range [Max] | 275 °F |
| Outer Ring Width | 0.406 in |
| Weight | 0.04 LB |
| EAN or UPC | 637400593438 |
