Find a Service Center
- Single Row Radial Bearing, 8 mm ID x 22 mm OD x 0.406" Wide, Double Sealed (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The 30 metric series is available with one felt seal (suffix T), with one felt seal and one shield (suffix TD), and with two felt seals (suffix TT). The felt seal provides an effective barrier against the entrance of foreign matter and the escape of lubricant. It is a contact seal with the felt riding on the ground surface of the inner ring O.D. Because the felt washer absorbs some lubricant, these bearings can be operated at moderate speeds without excessive heating. These bearings are electric-motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Type | Light Contact Seals |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| Precision | Standard |
| Seal Material | Felt |
| Material | Steel |
| Dynamic Load Rating | 830 lbf |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Radial Internal Clearance | Normal |
| No. in Set | Single Bearing |
| Inch/Metric | Metric Bore |
| Bearing Type | Radial |
| Temperature Range [Min] | -30 °F |
| O.D. | 22 mm |
| Cage Type | Metal |
| Outer Ring Width | 0.406 in |
| Contact Angle | 0° |
| Fillet Radius | 0.012 in |
| Width | 261.925 mm |
| Static Load Rating [Max] | 305 lbf |
| Lubricant | Polyurea Base |
| O.D. Type | Straight |
| Limiting Speed - Oil | 16350 rpm |
| Enclosure | Double Sealed |
| icNumber | 7700524 |
| Preload Level | None |
| Inner Ring Width | 0.406 in |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Cage Material | Steel |
| Temperature Range [Max] | 275 °F |
| I.D. | 8 mm |
| Bore Type | Round Bore |
| Limiting Speed - Grease | 14010 rpm |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance Specification | Normal Clearance |
| Weight | 0.04 LB |
| EAN or UPC | 637400593438 |
