Find a Service Center
- Wide Inner Ring Bearing, 8 mm ID x 22 mm OD x 0.406" Wide, One Seal, One Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The 30 metric series is available with one felt seal (suffix T), with one felt seal and one shield (suffix TD), and with two felt seals (suffix TT). The felt seal provides an effective barrier against the entrance of foreign matter and the escape of lubricant. It is a contact seal with the felt riding on the ground surface of the inner ring O.D. Because the felt washer absorbs some lubricant, these bearings can be operated at moderate speeds without excessive heating. These bearings are electric-motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Ball Material | Steel |
| I.D. | 8 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Preload Level | None |
| Enclosure | Single Seal, Single Shield |
| Static Load Rating [Max] | 305 lbf |
| Precision Level | Standard (ABEC 1) |
| Seal Material | Felt |
| Dynamic Load Rating | 830 lbf |
| Lubricant | Polyurea Base |
| Precision | Standard |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Temperature Range [Min] | -30 °F |
| Limiting Speed - Grease | 14010 rpm |
| Radial Internal Clearance | Normal |
| O.D. Type | Straight |
| Locking Device | No Locking Device |
| Bore Type | Round Bore |
| Inner Ring Width | 0.386 in |
| Seal Type | Light Contact Seals |
| Outer Ring Width | 0.406 in |
| Limiting Speed - Oil | 16350 rpm |
| Contact Angle | 0° |
| Temperature Range [Max] | 275 °F |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| icNumber | 7701283 |
| Material | Steel |
| Rows of Balls | Single |
| Inch/Metric | Metric Bore |
| Bearing Type | Radial |
| Cage Material | Steel |
| O.D. | 22 mm |
| Fillet Radius | 0.012 in |
| Origin | Single Row Radial |
| Weight | 0.04 LB |
| EAN or UPC | 637400593421 |
