Find a Service Center
- Wide Inner Ring Bearing, 8 mm ID x 22 mm OD x 0.406" Wide, One Seal, One Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The 30 metric series is available with one felt seal (suffix T), with one felt seal and one shield (suffix TD), and with two felt seals (suffix TT). The felt seal provides an effective barrier against the entrance of foreign matter and the escape of lubricant. It is a contact seal with the felt riding on the ground surface of the inner ring O.D. Because the felt washer absorbs some lubricant, these bearings can be operated at moderate speeds without excessive heating. These bearings are electric-motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Inner Ring Width | 0.386 in |
| Ball Material | Steel |
| Seal Type | Light Contact Seals |
| Bearing Type | Radial |
| Static Load Rating [Max] | 305 lbf |
| icNumber | 7701283 |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Single Seal, Single Shield |
| Seal Material | Felt |
| Fillet Radius | 0.012 in |
| Preload Level | None |
| Contact Angle | 0° |
| O.D. Type | Straight |
| Cage Type | Metal |
| Precision | Standard |
| I.D. | 8 mm |
| Limiting Speed - Oil | 16350 rpm |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 830 lbf |
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Round Bore |
| Temperature Range [Min] | -30 °F |
| Inch/Metric | Metric Bore |
| Capacity | Standard Capacity |
| Lubricant | Polyurea Base |
| Cage Material | Steel |
| Limiting Speed - Grease | 14010 rpm |
| Origin | Single Row Radial |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| O.D. | 22 mm |
| Material | Steel |
| Radial Internal Clearance | Normal |
| Outer Ring Width | 0.406 in |
| Temperature Range [Max] | 275 °F |
| Locking Device | No Locking Device |
| Weight | 0.04 LB |
| EAN or UPC | 637400593421 |
