Find a Service Center
- Single Row Radial Bearing, 10 mm ID x 30 mm OD x 0.656" Wide, Double Sealed (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The felt seal type ball bearing permits certain design economies, but cannot be assumed to be suitable for all conditions of service.In many cases it is supplemented by other parts for really adequate bearing protection in small equipment such as fractional horsepower motors, electric vacuum cleaners, small gear units, electric and pheumatic tools, etc. Felt seal bearings are recommended for effective grease retention and exclusion of foreign matter. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Limiting Speed - Oil | 12250 rpm |
| Inner Ring Width | 0.656 in |
| Origin | Single Row Radial |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| Precision Level | Standard (ABEC 1) |
| I.D. | 10 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| No. in Set | Single Bearing |
| icNumber | 7700525 |
| Seal Type | Light Contact Seals |
| Precision | Standard |
| Static Load Rating [Max] | 585 lbf |
| Outer Ring Width | 0.656 in |
| Seal Material | Felt |
| Lubricant | Polyurea Base |
| Ball Material | Steel |
| Material | Steel |
| Temperature Range [Max] | 275 °F |
| Rows of Balls | Single |
| Cage Material | Steel |
| Fillet Radius | 0.024 in |
| Locking Device | No Locking Device |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance | Normal |
| O.D. | 30 mm |
| Dynamic Load Rating | 1490 lbf |
| O.D. Type | Straight |
| Cage Type | Metal |
| Temperature Range [Min] | -30 °F |
| Enclosure | Double Sealed |
| Capacity | Standard Capacity |
| Bearing Type | Radial |
| Limiting Speed - Grease | 10500 rpm |
| Preload Level | None |
| Weight | 0.1 LB |
| EAN or UPC | 637400593049 |
