Find a Service Center
- Single Row Radial Bearing, 10 mm ID x 30 mm OD x 0.656" Wide, Double Sealed (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The felt seal type ball bearing permits certain design economies, but cannot be assumed to be suitable for all conditions of service.In many cases it is supplemented by other parts for really adequate bearing protection in small equipment such as fractional horsepower motors, electric vacuum cleaners, small gear units, electric and pheumatic tools, etc. Felt seal bearings are recommended for effective grease retention and exclusion of foreign matter. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Type | Light Contact Seals |
| Outer Ring Width | 0.656 in |
| Radial Internal Clearance | Normal |
| O.D. | 30 mm |
| Limiting Speed - Oil | 12250 rpm |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Normal Clearance |
| Cage Material | Steel |
| Ball Material | Steel |
| I.D. | 10 mm |
| O.D. Type | Straight |
| Material | Steel |
| Precision | Standard |
| Temperature Range [Min] | -30 °F |
| Inner Ring Width | 0.656 in |
| Preload Level | None |
| Static Load Rating [Max] | 585 lbf |
| Cage Type | Metal |
| Seal Material | Felt |
| Locking Device | No Locking Device |
| Temperature Range [Max] | 275 °F |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7700525 |
| Dynamic Load Rating | 1490 lbf |
| Lubricant | Polyurea Base |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric Bore |
| Enclosure | Double Sealed |
| Bearing Type | Radial |
| Limiting Speed - Grease | 10500 rpm |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Fillet Radius | 0.024 in |
| No. in Set | Single Bearing |
| Origin | Single Row Radial |
| Weight | 0.1 LB |
| EAN or UPC | 637400593049 |
