Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Shock ready
- Slides without cylinders
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Port Type | NPTF |
| Weight per Inch | 0.85 lb |
| Support Rod Diameter | 30 mm |
| Proximity Sensor | No Proximity Sensor |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Intermediate Stroke | N/A |
| Bumpers - Slide | Bumpers (Both Ends) |
| Cushions - Slide | No Cushions |
| Base Wt. | 24.45 lb |
| Port Size | 3/8 |
| Pressure [Max] | 750 psi |
| Proximity Sensor Code | None |
| Slide Configuration Option Code | B |
| Slide Orientation | Right Hand (Standard) |
| Support Rod Material | Steel |
| Temperature Range [Max] | 165 °F |
| Bearing Type | Composite Bearing |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Positions | 2 Position |
| Flow Controls | w/o Flow Controls |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Stroke | 9 in |
| Series | HBT |
| Cylinder Seal Material | Buna-N |
| Shock Absorbers - Slide | No Shock Absorber |
| Port Location | Standard (Position 1) |
| Cylinder Bore Size | 2.5 in |
| Slide Type | Thrust Slide |
| Temperature Range [Min] | 0 °F |
| Weight | 32.1 LB |
