Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Shock ready
- Slides without cylinders
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor | No Proximity Sensor |
| Shock Absorbers - Slide | No Shock Absorber |
| Slide Configuration Option Code | B |
| Port Location | Standard (Position 1) |
| Temperature Range [Max] | 165 °F |
| Weight per Inch | 0.85 lb |
| Support Rod Diameter | 30 mm |
| Cylinder Seal Material | Buna-N |
| Intermediate Stroke | N/A |
| Bearing Type | Composite Bearing |
| Positions | 2 Position |
| Base Wt. | 24.45 lb |
| Series | HBT |
| Slide Type | Thrust Slide |
| Port Size | 3/8 |
| Cushions - Slide | No Cushions |
| Cylinder Bore Size | 2.5 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Flow Controls | w/o Flow Controls |
| Stroke | 9 in |
| Port Type | NPTF |
| Bumpers - Slide | Bumpers (Both Ends) |
| Temperature Range [Min] | 0 °F |
| Proximity Sensor Code | None |
| Slide Orientation | Right Hand (Standard) |
| Support Rod Material | Steel |
| Pressure [Max] | 750 psi |
| Weight | 32.1 LB |
