Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Slide Configuration Option Code | C |
| Port Location | Standard (Position 1) |
| Bearing Type | Composite Bearing |
| Base Wt. | 24.45 lb |
| Port Size | 3/8 |
| Slide Orientation | Right Hand (Standard) |
| Positions | 2 Position |
| Weight per Inch | 0.85 lb |
| Stroke | 4 in |
| Cylinder Seal Material | Buna-N |
| Temperature Range [Min] | 0 °F |
| Temperature Range [Max] | 165 °F |
| Proximity Sensor Code | None |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Flow Controls | w/o Flow Controls |
| Slide Type | Thrust Slide |
| Intermediate Stroke | N/A |
| Cylinder Bore Size | 2.5 in |
| Proximity Sensor | No Proximity Sensor |
| Bumpers - Slide | No Bumpers |
| Cushions - Slide | Cushioned (Both Ends) |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Support Rod Diameter | 30 mm |
| Port Type | NPTF |
| Shock Absorbers - Slide | No Shock Absorber |
| Pressure [Max] | 750 psi |
| Series | HBT |
| Support Rod Material | Steel |
| Weight | 27.85 LB |
