Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Bearing Type | Composite Bearing |
| Support Rod Material | Steel |
| Weight per Inch | 0.85 lb |
| Temperature Range [Min] | 0 °F |
| Temperature Range [Max] | 165 °F |
| Cylinder Seal Material | Buna-N |
| Stroke | 4 in |
| Bumpers - Slide | No Bumpers |
| Slide Configuration Option Code | C |
| Series | HBT |
| Slide Type | Thrust Slide |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Port Type | NPTF |
| Proximity Sensor | No Proximity Sensor |
| Cylinder Bore Size | 2.5 in |
| Proximity Sensor Code | None |
| Port Size | 3/8 |
| Shock Absorbers - Slide | No Shock Absorber |
| Cushions - Slide | Cushioned (Both Ends) |
| Base Wt. | 24.45 lb |
| Positions | 2 Position |
| Pressure [Max] | 750 psi |
| Flow Controls | w/o Flow Controls |
| Intermediate Stroke | N/A |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Port Location | Standard (Position 1) |
| Support Rod Diameter | 30 mm |
| Slide Orientation | Right Hand (Standard) |
| Weight | 27.85 LB |
