Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 1 1/2" Stroke
- Steel Rails
- Ball Bearing
- 50 mm Bore ISO Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Proximity Sensor Code | None |
| Port Type | BSP |
| Intermediate Stroke | N/A |
| Port Location | Standard (Position 1) |
| Bearing Type | Ball Bearing |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Support Rod Material | Steel |
| Proximity Sensor | No Proximity Sensor |
| Cushions - Slide | Cushioned (Both Ends) |
| Pressure [Max] | 150 psi |
| Cylinder Bore Size | 50 mm |
| Base Wt. | 14.35 lb |
| Temperature Range [Min] | 0 °F |
| Series | HBT |
| Slide Configuration Option Code | C |
| Shock Absorbers - Slide | No Shock Absorber |
| Weight per Inch | 0.64 lb |
| Cylinder Seal Material | Buna-N |
| Flow Controls | w/o Flow Controls |
| Stroke | 1 1/2 in |
| Slide Orientation | Right Hand (Standard) |
| Bumpers - Slide | No Bumpers |
| Slide Type | Thrust Slide |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Temperature Range [Max] | 165 °F |
| Positions | 2 Position |
| Cylinder Type | ISO Pneumatic Cylinder |
| Port Size | 3/8 |
| Support Rod Diameter | 25 mm |
| Weight | 15.31 LB |
