Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 1 1/2" Stroke
- Steel Rails
- Ball Bearing
- 50 mm Bore ISO Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Stroke | 1 1/2 in |
| Port Type | BSP |
| Slide Type | Thrust Slide |
| Base Wt. | 14.35 lb |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor Code | None |
| Positions | 2 Position |
| Proximity Sensor | No Proximity Sensor |
| Bumpers - Slide | No Bumpers |
| Temperature Range [Max] | 165 °F |
| Temperature Range [Min] | 0 °F |
| Shock Absorbers - Slide | No Shock Absorber |
| Weight per Inch | 0.64 lb |
| Cushions - Slide | Cushioned (Both Ends) |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Support Rod Diameter | 25 mm |
| Port Size | 3/8 |
| Cylinder Bore Size | 50 mm |
| Flow Controls | w/o Flow Controls |
| Support Rod Material | Steel |
| Port Location | Standard (Position 1) |
| Bearing Type | Ball Bearing |
| Slide Configuration Option Code | C |
| Cylinder Type | ISO Pneumatic Cylinder |
| Pressure [Max] | 150 psi |
| Intermediate Stroke | N/A |
| Series | HBT |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Seal Material | Buna-N |
| Weight | 15.31 LB |
