The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cylinder Seal Material
Buna-N
Port Size
1/4
Weight per Inch
0.48 lb
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Both Ends)
Support Rod Diameter
20 mm
Support Rod Material
Steel
Stroke Tolerance
+0.030 in / -0.000 in
Proximity Sensor
No Proximity Sensor
Dowel Pin Holes
w/o Dowel Pin Holes
Bearing Type
Composite Bearing
Series
HBT
Flow Controls
w/o Flow Controls
Slide Type
Thrust Slide
Cushions - Slide
Cushioned (Both Ends)
Pressure [Max]
150 psi
Intermediate Stroke
N/A
Stroke
9 in
Port Location
Opposite of Standard (Position 3)
Port Type
NPTF
Cylinder Bore Size
1.5 in
Positions
2 Position
Proximity Sensor Code
None
Slide Orientation
Right Hand (Standard)
Base Wt.
8.86 lb
Temperature Range [Max]
165 °F
Cylinder Type
NFPA Pneumatic Cylinder
Slide Configuration Option Code
C, B4
Temperature Range [Min]
0 °F
Shock Absorbers - Slide
No Shock Absorber
Weight
13.18 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
