The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Support Rod Material
Steel
Slide Orientation
Right Hand (Standard)
Stroke Tolerance
+0.030 in / -0.000 in
Support Rod Diameter
20 mm
Port Size
1/4
Stroke
9 in
Shock Absorbers - Slide
No Shock Absorber
Base Wt.
8.86 lb
Bearing Type
Composite Bearing
Temperature Range [Min]
0 °F
Port Location
Opposite of Standard (Position 3)
Cylinder Seal Material
Buna-N
Temperature Range [Max]
165 °F
Cushions - Slide
Cushioned (Both Ends)
Slide Type
Thrust Slide
Cylinder Type
NFPA Pneumatic Cylinder
Dowel Pin Holes
w/o Dowel Pin Holes
Series
HBT
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Both Ends)
Port Type
NPTF
Proximity Sensor Code
None
Pressure [Max]
150 psi
Positions
2 Position
Flow Controls
w/o Flow Controls
Proximity Sensor
No Proximity Sensor
Cylinder Bore Size
1.5 in
Intermediate Stroke
N/A
Slide Configuration Option Code
C, B4
Weight per Inch
0.48 lb
Weight
13.18 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
