Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Stainless Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Shock Absorbers - Slide | No Shock Absorber |
| Proximity Sensor | No Proximity Sensor |
| Temperature Range [Min] | 0 °F |
| Intermediate Stroke | N/A |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Flow Controls | w/o Flow Controls |
| Support Rod Diameter | 20 mm |
| Slide Type | Thrust Slide |
| Proximity Sensor Code | None |
| Weight per Inch | 0.48 lb |
| Cylinder Bore Size | 1.5 in |
| Stroke | 8 in |
| Cylinder Seal Material | Buna-N |
| Base Wt. | 8.86 lb |
| Port Size | 1/4 |
| Cushions - Slide | No Cushions |
| Support Rod Material | Stainless Steel |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Location | Standard (Position 1) |
| Positions | 2 Position |
| Pressure [Max] | 150 psi |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Series | HBT |
| Port Type | NPTF |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Slide Orientation | Right Hand (Standard) |
| Bumpers - Slide | Bumpers (Both Ends) |
| Temperature Range [Max] | 165 °F |
| Slide Configuration Option Code | B |
| Weight | 12.7 LB |
