Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Stainless Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Support Rod Diameter | 20 mm |
| Positions | 2 Position |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Weight per Inch | 0.48 lb |
| Stroke | 8 in |
| Port Location | Standard (Position 1) |
| Slide Configuration Option Code | B |
| Temperature Range [Max] | 165 °F |
| Cylinder Bore Size | 1.5 in |
| Port Size | 1/4 |
| Series | HBT |
| Cushions - Slide | No Cushions |
| Support Rod Material | Stainless Steel |
| Cylinder Seal Material | Buna-N |
| Port Type | NPTF |
| Intermediate Stroke | N/A |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Proximity Sensor | No Proximity Sensor |
| Temperature Range [Min] | 0 °F |
| Base Wt. | 8.86 lb |
| Shock Absorbers - Slide | No Shock Absorber |
| Bumpers - Slide | Bumpers (Both Ends) |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Pressure [Max] | 150 psi |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Slide Type | Thrust Slide |
| Proximity Sensor Code | None |
| Flow Controls | w/o Flow Controls |
| Weight | 12.7 LB |
