Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Cushions - Slide | Cushioned (Both Ends) |
| Weight per Inch | 0.48 lb |
| Bumpers - Slide | No Bumpers |
| Intermediate Stroke | N/A |
| Port Location | Standard (Position 1) |
| Cylinder Seal Material | Buna-N |
| Proximity Sensor Code | None |
| Pressure [Max] | 150 psi |
| Port Type | NPTF |
| Bearing Type | Composite Bearing |
| Support Rod Diameter | 20 mm |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Temperature Range [Min] | 0 °F |
| Support Rod Material | Steel |
| Slide Type | Thrust Slide |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Cylinder Bore Size | 1.5 in |
| Stroke | 4 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Slide Configuration Option Code | A, C |
| Positions | 2 Position |
| Proximity Sensor | No Proximity Sensor |
| Flow Controls | w/o Flow Controls |
| Series | HBT |
| Port Size | 1/4 |
| Base Wt. | 8.86 lb |
| Temperature Range [Max] | 165 °F |
| Weight | 10.78 LB |
