Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Temperature Range [Max] | 165 °F |
| Series | HBT |
| Proximity Sensor | No Proximity Sensor |
| Port Type | NPTF |
| Base Wt. | 8.86 lb |
| Cylinder Seal Material | Buna-N |
| Bumpers - Slide | No Bumpers |
| Weight per Inch | 0.48 lb |
| Slide Orientation | Right Hand (Standard) |
| Positions | 2 Position |
| Port Location | Standard (Position 1) |
| Bearing Type | Composite Bearing |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Proximity Sensor Code | None |
| Cylinder Bore Size | 1.5 in |
| Port Size | 1/4 |
| Intermediate Stroke | N/A |
| Stroke | 4 in |
| Support Rod Diameter | 20 mm |
| Slide Configuration Option Code | A, C |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Cushions - Slide | Cushioned (Both Ends) |
| Slide Type | Thrust Slide |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Support Rod Material | Steel |
| Pressure [Max] | 150 psi |
| Temperature Range [Min] | 0 °F |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Flow Controls | w/o Flow Controls |
| Weight | 10.78 LB |
