The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Proximity Sensor Code
None
Flow Controls
w/o Flow Controls
Bearing Type
Composite Bearing
Dowel Pin Holes
w/o Dowel Pin Holes
Slide Type
Thrust Slide
Stroke
2 in
Temperature Range [Max]
250 °F
Positions
2 Position
Weight per Inch
0.48 lb
Cylinder Type
NFPA Hydraulic Cylinder
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Extend Only)
Base Wt.
8.86 lb
Port Location
Standard (Position 1)
Port Type
NPTF
Proximity Sensor
No Proximity Sensor
Support Rod Diameter
20 mm
Pressure [Max]
750 psi
Stroke Tolerance
+0.030 in / -0.000 in
Port Size
1/4
Cylinder Seal Material
Viton
Slide Orientation
Right Hand (Standard)
Slide Configuration Option Code
C, B1
Shock Absorbers - Slide
No Shock Absorber
Intermediate Stroke
N/A
Cylinder Bore Size
1.5 in
Support Rod Material
Steel
Cushions - Slide
Cushioned (Both Ends)
Temperature Range [Min]
0 °F
Series
HBT
Weight
9.82 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
