The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Slide Type
Thrust Slide
Cushions - Slide
Cushioned (Both Ends)
Proximity Sensor
No Proximity Sensor
Slide Configuration Option Code
C, B1
Intermediate Stroke
N/A
Dowel Pin Holes
w/o Dowel Pin Holes
Support Rod Material
Steel
Slide Orientation
Right Hand (Standard)
Stroke Tolerance
+0.030 in / -0.000 in
Cylinder Type
NFPA Hydraulic Cylinder
Pressure [Max]
750 psi
Base Wt.
8.86 lb
Port Type
NPTF
Flow Controls
w/o Flow Controls
Proximity Sensor Code
None
Series
HBT
Shock Absorbers - Slide
No Shock Absorber
Support Rod Diameter
20 mm
Weight per Inch
0.48 lb
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Extend Only)
Temperature Range [Max]
250 °F
Stroke
2 in
Cylinder Bore Size
1.5 in
Port Location
Standard (Position 1)
Port Size
1/4
Bearing Type
Composite Bearing
Positions
2 Position
Cylinder Seal Material
Viton
Temperature Range [Min]
0 °F
Weight
9.82 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
