Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 2" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Stroke | 2 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Intermediate Stroke | N/A |
| Support Rod Material | Steel |
| Port Size | 1/4 |
| Support Rod Diameter | 20 mm |
| Base Wt. | 8.86 lb |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Series | HBT |
| Flow Controls | w/o Flow Controls |
| Cylinder Bore Size | 1.5 in |
| Proximity Sensor | No Proximity Sensor |
| Temperature Range [Max] | 165 °F |
| Cushions - Slide | No Cushions |
| Pressure [Max] | 750 psi |
| Slide Type | Thrust Slide |
| Bearing Type | Composite Bearing |
| Slide Configuration Option Code | A |
| Positions | 2 Position |
| Bumpers - Slide | No Bumpers |
| Port Type | NPTF |
| Cylinder Seal Material | Buna-N |
| Weight per Inch | 0.48 lb |
| Temperature Range [Min] | 0 °F |
| Port Location | Standard (Position 1) |
| Proximity Sensor Code | None |
| Slide Orientation | Right Hand (Standard) |
| Weight | 9.82 LB |
