Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 2" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Slide Type | Thrust Slide |
| Cushions - Slide | No Cushions |
| Intermediate Stroke | N/A |
| Positions | 2 Position |
| Bearing Type | Composite Bearing |
| Slide Configuration Option Code | A |
| Base Wt. | 8.86 lb |
| Slide Orientation | Right Hand (Standard) |
| Series | HBT |
| Cylinder Bore Size | 1.5 in |
| Proximity Sensor | No Proximity Sensor |
| Support Rod Material | Steel |
| Bumpers - Slide | No Bumpers |
| Temperature Range [Max] | 165 °F |
| Port Size | 1/4 |
| Stroke | 2 in |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Cylinder Seal Material | Buna-N |
| Port Location | Standard (Position 1) |
| Temperature Range [Min] | 0 °F |
| Weight per Inch | 0.48 lb |
| Support Rod Diameter | 20 mm |
| Port Type | NPTF |
| Proximity Sensor Code | None |
| Pressure [Max] | 750 psi |
| Flow Controls | w/o Flow Controls |
| Weight | 9.82 LB |
