Find a Service Center
- Non-Expansion Ball Bearing Flange Unit
- 4-Bolt Flange
- 2 in Shaft Diameter
- 6.4 in Housing Length
- Cast Iron Housing
features
- Provides greater rigidity when mounted than two-bolt flanges
- Single-lip seal with flinger
- Self-aligning: outer bearing surface and internal housing surface are spherical
- Eccentric locking collar
- Unique, secure fitting even in cases where bearing is subjected to intense vibrations or shocks
- Higher-rated load capacity than that of corresponding self-aligning ball bearings
- Lightweight-yet-strong housing
- Easy mounting
- Accurate fitting of the housing
- Replaceable - new bearing can be fitted to existing housing
caution
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Length Through Bore | 2.811 in |
| Flange Style | 4-Bolt Square |
| Bolt Size | 5/8 |
| Housing No. | F211D1 |
| Shaft Dia. | 2 in |
| Housing Material | Cast Iron |
| Style | 4-Bolt Flange |
| Inch/Metric | Inch |
| Locking Device | Eccentric Locking Collar |
| Bearing Design | Non-Expansion |
| End Type | Open End |
| Static Load Rating [Max] | 6550 lbf |
| Temperature Range [Max] | 225 °F, 250 °F |
| Housing Width | 6 3/8 in |
| Flange Thickness | 0.71875 in |
| Bolt Hole Spacing | 5.1 in, 5 1/8 in |
| Housing Height | 6 3/8 in |
| Bearing Type | Ball Bearing |
| Housing Length | 6.4 in |
| Housing Construction | 1 Piece |
| Center Of Bearing From End | 0.984375 |
| Seal Material | Nitrile Rubber |
| Mounted Unit Duty | Light-Duty |
| Series | UELF |
| Temperature Range [Min] | -40 °F |
| Dynamic Load Rating | 9800 lbf |
| Limiting Speed | 2900 rpm |
| Flange Type | 4-Bolt Flange |
| Seal Type | Contact Seals, Contact Seals w/Flingers |
| Bearing Insert | UEL211-200D1 |
| Bolt Hole Size | 3/4 in |
| Center of Bearing to Back of Inner Ring | 1.095 in |
| Lubrication | Relubricatable |
| Weight | 8.48 LB |
| EAN or UPC | 4547359505467 |
