Find a Service Center
- Non-Expansion Ball Bearing Flange Unit
- 4-Bolt Flange
- 2 in Shaft Diameter
- 6.4 in Housing Length
- Cast Iron Housing
features
- Provides greater rigidity when mounted than two-bolt flanges
- Single-lip seal with flinger
- Self-aligning: outer bearing surface and internal housing surface are spherical
- Eccentric locking collar
- Unique, secure fitting even in cases where bearing is subjected to intense vibrations or shocks
- Higher-rated load capacity than that of corresponding self-aligning ball bearings
- Lightweight-yet-strong housing
- Easy mounting
- Accurate fitting of the housing
- Replaceable - new bearing can be fitted to existing housing
caution
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Shaft Dia. | 2 in |
| Flange Type | 4-Bolt Flange |
| Lubrication | Relubricatable |
| Housing Height | 6 3/8 in |
| Flange Thickness | 0.71875 in |
| Style | 4-Bolt Flange |
| Flange Style | 4-Bolt Square |
| Center of Bearing to Back of Inner Ring | 1.095 in |
| Bolt Size | 5/8 |
| Housing Material | Cast Iron |
| Bearing Type | Ball Bearing |
| Dynamic Load Rating | 9800 lbf |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 5.1 in, 5 1/8 in |
| Housing Construction | 1 Piece |
| Series | UELF |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Light-Duty |
| Temperature Range [Max] | 225 °F, 250 °F |
| Bolt Hole Size | 3/4 in |
| Bearing Insert | UEL211-200D1 |
| Housing No. | F211D1 |
| Limiting Speed | 2900 rpm |
| Seal Type | Contact Seals, Contact Seals w/Flingers |
| End Type | Open End |
| Temperature Range [Min] | -40 °F |
| Housing Width | 6 3/8 in |
| Inch/Metric | Inch |
| Seal Material | Nitrile Rubber |
| Center Of Bearing From End | 0.984375 |
| Length Through Bore | 2.811 in |
| Housing Length | 6.4 in |
| Static Load Rating [Max] | 6550 lbf |
| Weight | 8.48 LB |
| EAN or UPC | 4547359505467 |
