
- Single Row Angular Contact Bearing, 130 mm ID x 280 mm OD x 58 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Preload Level | None |
Bore Type | Round Bore |
O.D. Type | Straight |
Static Load Rating | 305 kN |
Dynamic Load Rating | 64300 lbf |
Flush Ground | Yes |
Origin | Single Row Angular Contact |
Radial Internal Clearance Specification | Normal Clearance |
Locking Device | No Locking Device |
Fillet Radius | 3 mm |
Limiting Speed - Oil | 3000 rpm |
Cage Type | Metal |
Temperature Range [Max] | 450 °F |
Snap Ring | No Snap Ring |
O.D. | 280 mm |
Internal Design | Universal Mounting |
Lubricant | Oil Preservative |
No. in Set | Duplex Set |
Limiting Speed - Grease | 2300 rpm |
Precision Level | Standard (ABEC 1) |
Seal Type | Unsealed |
Seal Material | None |
Bearing Type | Angular Contact |
icNumber | 7699070 |
I.D. | 130 mm |
Precision | Standard |
Material | Steel |
Rows of Balls | Single |
Inch/Metric | Metric Bore |
Cage Material | Brass/Bronze |
Capacity | Standard Capacity |
Radial Internal Clearance | Normal |
Ball Material | Steel |
Static Load Rating [Max] | 71900 lbf |
Inner Ring Width | 58 mm |
Width | 58.000 mm |
Contact Angle | 40° |
Enclosure | Open |
Outer Ring Width | 58 mm |
Series | 7300P |
Weight | 39.854 LB |
EAN or UPC | 97741018265 |
