
- Single Row Angular Contact Bearing, 130 mm ID x 280 mm OD x 58 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Inch/Metric | Metric Bore |
Dynamic Load Rating | 64300 lbf |
Fillet Radius | 3 mm |
Seal Material | None |
Enclosure | Open |
I.D. | 130 mm |
Capacity | Standard Capacity |
Temperature Range [Max] | 450 °F |
Precision Level | Standard (ABEC 1) |
Limiting Speed - Oil | 3000 rpm |
O.D. | 280 mm |
O.D. Type | Straight |
Contact Angle | 40° |
No. in Set | Duplex Set |
Material | Steel |
Flush Ground | Yes |
Precision | Standard |
Origin | Single Row Angular Contact |
Width | 58.000 mm |
Static Load Rating [Max] | 71900 lbf |
Preload Level | None |
Limiting Speed - Grease | 2300 rpm |
Lubricant | Oil Preservative |
Inner Ring Width | 58 mm |
Series | 7300P |
Bearing Type | Angular Contact |
Cage Material | Brass/Bronze |
Radial Internal Clearance | Normal |
Outer Ring Width | 58 mm |
Rows of Balls | Single |
Locking Device | No Locking Device |
Radial Internal Clearance Specification | Normal Clearance |
Cage Type | Metal |
Seal Type | Unsealed |
Static Load Rating | 305 kN |
Ball Material | Steel |
icNumber | 7699070 |
Snap Ring | No Snap Ring |
Internal Design | Universal Mounting |
Bore Type | Round Bore |
Weight | 39.854 LB |
EAN or UPC | 97741018265 |
