Find a Service Center
Alternate Products
MRC Bearing Service
8318
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100760780
- Single Row Angular Contact Bearing, 90 mm ID x 190 mm OD x 43 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Enclosure | Open |
| Radial Internal Clearance Specification | Normal Clearance |
| Series | 7300P |
| Internal Design | Universal Mounting |
| Contact Angle | 40 Degree |
| Material | Bearing Steel |
| Radial Internal Clearance | Normal |
| Capacity | Standard Capacity |
| Origin | Single Row Angular Contact |
| O.D. Type | Cylindrical |
| Ball Material | Steel |
| Dynamic Load Rating | 159 kN |
| Snap Ring | No Snap Ring |
| Locking Device | No Locking Device |
| O.D. | 7.48 in, 190 mm |
| Cage Material | Brass |
| Limiting Speed - Grease | 3200 rpm |
| Inch/Metric | Metric |
| icNumber | 7699067 |
| Static Load Rating | 137 kN |
| Fillet Radius | 2.5 mm |
| Bearing Type | Unmounted, Angular Contact |
| Preload Level | Light |
| I.D. | 3.54 in, 90 mm |
| Seal Type | Unsealed |
| Precision Level | Standard (ABEC 1) |
| Temperature Range [Max] | 450 °F |
| Seal Material | None |
| Flush Ground | Yes |
| No. in Set | Duplex Set |
| Static Load Rating [Max] | 33700 lbf |
| Bore Type | Cylindrical |
| Limiting Speed - Oil | 4200 rpm |
| Outer Ring Width | 1.69 in, 43 mm |
| Width | 1.69 in, 43 mm |
| Cage Type | Metal |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Inner Ring Width | 1.69 in, 43 mm |
| Rows of Balls | Single |
| Weight | 13.145 LB |
| EAN or UPC | 97741018067 |
