Find a Service Center
Alternate Products
MRC Bearing Service
8318
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100760780
- Single Row Angular Contact Bearing, 90 mm ID x 190 mm OD x 43 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Flush Ground | Yes |
| O.D. | 7.48 in, 190 mm |
| Fillet Radius | 2.5 mm |
| Rows of Balls | Single |
| Cage Material | Brass |
| Contact Angle | 40 Degree |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 3200 rpm |
| Radial Internal Clearance | Normal |
| Bearing Type | Unmounted, Angular Contact |
| Inner Ring Width | 1.69 in, 43 mm |
| Lubricant | Oil Preservative |
| Limiting Speed - Oil | 4200 rpm |
| Snap Ring | No Snap Ring |
| Seal Material | None |
| Outer Ring Width | 1.69 in, 43 mm |
| O.D. Type | Cylindrical |
| Temperature Range [Max] | 450 °F |
| Enclosure | Open |
| Material | Bearing Steel |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Series | 7300P |
| Width | 1.69 in, 43 mm |
| Origin | Single Row Angular Contact |
| Static Load Rating [Max] | 33700 lbf |
| Static Load Rating | 137 kN |
| Cage Type | Metal |
| No. in Set | Duplex Set |
| Radial Internal Clearance Specification | Normal Clearance |
| icNumber | 7699067 |
| Inch/Metric | Metric |
| Preload Level | Light |
| I.D. | 3.54 in, 90 mm |
| Precision | Standard |
| Seal Type | Unsealed |
| Internal Design | Universal Mounting |
| Bore Type | Cylindrical |
| Dynamic Load Rating | 159 kN |
| Weight | 13.145 LB |
| EAN or UPC | 97741018067 |
