
- Single Row Angular Contact Bearing, 80 mm ID x 170 mm OD x 78 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Capacity | Standard Capacity |
Fillet Radius | 2 mm |
No. in Set | Duplex Set |
Series | 7300P |
Flush Ground | Yes |
icNumber | 7702945 |
Precision | Standard |
Seal Material | None |
Lubricant | Oil Preservative |
Radial Internal Clearance Specification | Normal Clearance |
Static Load Rating [Max] | 27000 lbf |
Inch/Metric | Metric Bore |
Locking Device | No Locking Device |
Rows of Balls | Single |
Bore Type | Round Bore |
Limiting Speed - Oil | 4700 rpm |
Cage Material | Brass/Bronze |
I.D. | 80 mm |
Material | Steel |
Precision Level | Standard (ABEC 1) |
Preload Level | None |
Temperature Range [Max] | 450 °F |
Snap Ring | No Snap Ring |
Inner Ring Width | 78 mm |
Origin | Single Row Angular Contact |
Radial Internal Clearance | Normal |
Limiting Speed - Grease | 3600 rpm |
O.D. Type | Straight |
Enclosure | Open |
Ball Material | Steel |
Width | 78.000 mm |
Outer Ring Width | 78 mm |
Seal Type | Unsealed |
O.D. | 170 mm |
Dynamic Load Rating | 32100 lbf |
Cage Type | Metal |
Bearing Type | Angular Contact |
Contact Angle | 40° |
Static Load Rating | 110 kN |
Internal Design | Universal Mounting |
Weight | 8.8 LB |
EAN or UPC | 97741017947 |
